1. Lower print resolution

Although thermal inkjet printers can print at a very high print resolution of 600 dpi, it is not always necessary. While barcodes and data matrix codes usually have to be high-resolution, a lower dot density will do for many other applications. Test which print quality is sufficient for you. The lower the resolution of the printed image, the lower the ink consumption.

2. Select a different font

A closer look is also worthwhile when it comes to fonts. Did you know that there is a saving potential of up to 75%? Spacious typefaces as well as serifs take up more ink than necessary. Instead, choose sans-serifs, light font-weights or so-called ‘ecofonts’.

3. Empty ink cartridges completely

Since production stops cost a lot of money, ink cartridges are often simply changed during scheduled downtime by way of precaution. This way, however, unused ink rests go to waste. While many devices indicate the ink level automatically indeed, Weber Marking Systems takes it one step further: We have developed a non-stop printing feature which operates two synchronized printheads simultaneously. Whenever one cartridge runs out of ink, the other one will continue printing automatically. This will allow you to replace the empty cartridge while the production keeps on running!

4. Use original ink cartridges

Third-party manufacturers may seem cheaper at first glance. However, there is a risk that the savings will be at the expense of print quality. In the worst case, non-approved inks even lead to failures in the printing system. In addition, they are usually not as productive as the original products.

5. Protect the printheads

Be careful not to let the inkjet printhead dry out or become clogged with dust or else. This happens when an open ink cartridge is idle for a longer period. The result will be a poor print quality. You can prevent this by covering the ink cartridges during downtime. We offer a particularly practical solution with our Markoprint Shutter printhead, which is an industry-grade self-sealing thermal inkjet printhead. Other great solution are inkjet printers with IP code 65 such as our Markoprint integra One thermal dod printer or our Markoprint integra Ultimate printhead.

6. Central ink supply

At high print volumes, a central ink supply system may be worthwhile. It is an intelligent storage system that reports the ink level of the cartridges to the system in real time. These can then be refilled automatically during the printing process.

Weber Marking Systems offers a bulk system for its Markoprint inkjet systems. It is especially suitable for quick-drying or solvent-based HP inks. Because the system holds up to 400 ml of ink, it reduces the number of cartridge changes required, and above all, lowers long-term operating costs.