Solutions Expertise For Bleedstop Nbspnbspnbspnbspnbspspecial Projects Pose Special Challenges To Schreiner Grouprsquos Employees And Typically Require Special Expertise A Case In Point Is The Challenge Of Achieving Reliable Adhesion Of A Pressuresensitive Adhesive To Tricky Substrates Adhesives Come In A Wide Range Of Types And Compositions Optimally Suiting The Particular Applicationmdashsuch As Rough Surfaces Adhesives For Rough Substrates Tend To Flow This Means That They Migrate Into And Remain In The Materialrsquos Pores However The Risk Of Adhesive Bleeding Is The Downside Of The Desired High Flow Characteristics Of Such Adhesives When The Adhesive Bleeds From The Label Edges It Sticks To The Label Roll And The Roll Is No Longer Usable For Automatic Dispensing Label Users That Maintain A Consistent Cold Chain Can Clearly Reduce The Risk Of Adhesive Bleeding However This Implies The Need For Refrigerated Transportation And Storage Of The Label Stock Even During The Label Application Process A Cooling Fan Is Required Many Users Find It Difficult Or Impossible To Ensure Such Conditions Wrapping In Silicone Paper Is Another Way To Counteract Adhesive Bleeding However This Makes Processing More Difficult And Therefore Is Not A Generally Viable Solution So What To Do Schreiner Group Has Developed A Bleedstop Solution In Which An Extremely Thin Laminate Is Placed Over The Label Protruding Two Millimetres 008 Inches From The Label Edge As A Result The Fluid Adhesive Can Bleed From The Label Edges But Is Covered By The Overlamination Even At Maximum Dispensing Speeds This Solution Allows Smooth Processing Of Selfadhesive Products Without Any Additional Effortnbsp Nbspfor Further Information Contactschreiner Group Gmbh Amp Co Kgbruckmannring 2285764 Oberschleissheimgermanyphone 49 89 315845494fax 49 89 315845420presseschreinergroupdenbsp